header

index

A success history

Company

Bettati Antincendio from over 38 years ecc...

The Bettati Group

Bettati antincendio fa parte della Holding Bettati Group, eccc....

The Bettati quality

Bettati Antincendio works according to a Quality Management System, as described in UNI EN ISO 9001:2008 standards and ensure that all relevant activities of design, production, installation and maintenance of fire protection systems and pressure equipment carried out in full compliance with the following criteria:

  • Definition of safety and quality requirements for products, in accordance with customer requests and applicable laws and regulations
  • Compliance with existing environmental regulations
  • Choice of suppliers in line with the company philosophy
  • Monitoring and recording every stage of production and delivery of the product/service
  • Qualification and continuous training of human resources
  • Cutting-edge equipment, technologies and work environment, to guarantee best results in our activities

Download pdf

Why Bettati Antincendio

Deeper know-how

With over 30 years of experience, the company continues to develop and certify new systems to fire fighting

Certified quality

All products and systems are first tested by Bettati on site and, after having passed all the tests with the quality standards, they are re-tested and proven by various certification bodies.

Tailor made solutions

Bettati, thanks to its qualified technical staff, designs and manufactures fire protection solution according to the customer's needs always in compliance with applicable regulations

cronistoria

A route 38 years long

2017

Our discharge valve model VHFC10200 for HFC227ea and FK-5-1-12 gas extinguishing system has reached the VdS approval (https://www.vds.de/verzeichnisse/pgla-firmen/).

The valve has been specifically designed to be used in traditional system pressurized at 42 bar and in innovative 70 bar system.

The 70 bar technology take the benefit of smaller pipes, longer cylinder/nozzles distance or make easier the retrofit of existing halon or HFC systems.

2015

A research program is activated with the aim of developing and certifying a constant flow valve for inert gas extinguishing system.
New products are introduced at Interschutz Expo in Hannover.

2014

A research program is activated with the aim of developing and approve a clean agent estinguishing system of 70 bar.

2013

Development and testing of a watermist system with cylinder suitable for sauna fire protection (high pressure system)

2012

Development and testing at DFL laboratory (Denmark) of an automatic watermist (hardware Bettati) nozzle suitable for offices/libraries and similar applications. Development of a silent nozzle for gas estinguishing system to be used in EPD rooms or data centers in order to minimize potential damages on hard drives. The nozzle has been hydraulically and acoustically tested.
The company has been appointed as italian distributor of VID Firekill products (Danish company specialized in watermist low pressure solutions)

2011

Bettati Holding expands: Tecnofire System, a specialized company in installation and maintenance of fire protection systems, is founded. Watermist tests in OH2 fire scenarios (parking garages) are performed at TE.S.I. laboratory in Rome

2010

Introduction of O.R.S. (Oxygen reduction system) and watermist systems with additives at the International Interschutz Exhibition in Germany

2009

The company obtains a fund from region Emilia Romagna for research and development in "Enhanced watermist systems with additives in different fire scenarios"

2008

CE certification for inert and halocarbon gas discharge valves and hardware from the "Institute of Research and Testing M. Masini" in Milan, according to italian regulation CPD 89/106/CE. New Bettati Holding Group is founded and buys out 100% of company Tecnoprotezione in Faenza (RA)

2006

Bettati Antincendio signs an agreement for program n. 2566/RAS with Italian competent ministries and provides its competence and experience for HCFC gases pick-up and substitution, according to italian decree D.M. 20.12.2005

2005

CE PED Certification for inert and halocarbon gas valves, according to italian regulation, 97-23-CE PED. The new headquarter in Reggio Emilia, via Disraeli 8, is inaugurated

2004

The company obtains a fund from region Emilia Romagna for research and development in "Mathematical model for the simulation of finely atomized water in different fire scenarios" (project n. 713, notification D.G.R. 1473). Connected activities are carried out in collaboration with the University of Modena and Reggio Emilia (Dept. of Mechanical and Civil Engineering) and the University of Maryland (USA) (Dept. of Fire Protection Engineering)

2003

A total of 150 tons of stored halon (starting from 1996) is reached, part of it is disposed and the rest is substituted with alternative products. Thanks to funds from the World Bank, Bettati Antincendio supplies and installs the first collection center for halon processes in Jordan

2002

The company gains ISO 9001:2000 quality certification from notified body RINA in the matter of "design, construction, installation, supply and maintenance of fire protection systems - extinguishing gas collection, recovery and treatment - provision of theoretical / practical training courses". The company becomes team leader of Firefighting Division of UMAN Association. Introduction of new Inert Gas Systems with 300 bar hardware and 80/140 lt cylinders at "Securtech" fair in Milan

2000

Introduction of inert gas and halocarbon systems at the International Interschutz Exhibition in Germany

1999

Bettati Antincendio introduces its new IG100 Inert Gas System with its own 200 bar hardware at the "Sicurtech" fair in Milan. The company starts an active participation in CEN/ISO working groups for the establishment of standards for the design, installation and maintenance of fire protection systems

1998

Bettati Antincendio becomes a partner of UMAN association (Union of Fire Material Manufacturers)

1996

Bettati Antincendio becomes a founding member of the Environment and Security Consortium for the disposal of halon from fire protection systems, according to DM 26.03.96

1990

Creation of the new Engineering Division for the design and installation of firefighting systems

1980

The company starts its activity through sale and maintenance of portable extinguishers and fire equipment

footer
pager